Fi-Clor Anti foam enables you to deal with foaming on the surface
of the water often caused by a build up of soaps, shampoos, detergents
or skin treatment products. 1 Litre.
- Only use when bathing has ceased.
- With the circulation running apply fi-clor Anti-Foam at a rate
of approximately 20ml to 1 square metre of the spa water surface area
after diluting at a ratio of 1 part product to 2 parts tap water. Repeat
if necessary according to the severity of the problem. Improvement
should be noticed shortly after application.
- Anti-Foam can be applied at regular intervals after filling to help prevent foaming.
- Excessive foaming is usually caused by an underlying problem.
Everything should be done to resolve this problem as otherwise the spa
will always foam.