Fi-Clor Spa Anti-Foam – 1Litre Fi-Clor Anti-Foam 1Litre

Fi-Clor Anti foam enables you to deal with foaming on the surface
of the water often caused by a build up of soaps, shampoos, detergents
or skin treatment products. 1 Litre.

Instructions

1. Only use when bathing has ceased.
2. With the circulation running apply fi-clor Anti-Foam at a rate
   of approximately 20ml to 1 square metre of the spa water surface area
   after diluting at a ratio of 1 part product to 2 parts tap water. Repeat
   if necessary according to the severity of the problem. Improvement
   should be noticed shortly after application.
3. Anti-Foam can be applied at regular intervals after filling to help prevent foaming.
4. Excessive foaming is usually caused by an underlying problem.
   Everything should be done to resolve this problem as otherwise the spa
   will always foam.